Low expansion construction adhesive

Low Expansion Construction Adhesive: Foam Adhesive for Insulation Boards

Bonding insulation boards with mortar or mechanical fixings is slow and creates cold bridges. Low expansion construction adhesive (Spraybond X100 Foambond) is a ready-to-use, one-component insulation board adhesive based on polyurethane foam. It combines strong adhesion with limited gap-filling capacity: enough to compensate for small irregularities between board and substrate, without the expansion of a filling foam. It does not attack EPS or XPS.

  • Approx. 55 litres of foam per 750 ml can, consumption 70–100 g/m²
  • Tack-free in 4–8 minutes, fully load-bearing after 12 hours
  • Compressive strength approx. 125 kPa at 10% deformation
  • 90% closed cells, helps reduce cold bridges between boards
  • Temperature resistance -35 °C to +95 °C, fire class B2 (DIN 4102)

Low Expansion Foam Adhesive for EPS, XPS, PUR and Mineral Wool

This low expansion foam adhesive bonds EPS, XPS, PUR and other insulation, cork and mineral wool to concrete, aerated concrete, fibre cement, bitumen, stainless steel and PVC. Applied with a PU foam gun, it is precise and economical to dose. Press boards evenly within the open time and support them until initial strength is reached. It is not intended to fill large cavities and not suitable for PE, PTFE, PP or temperatures above 100 °C. Smooth or coated surfaces may need a primer.

Looking for a Private Label Producer for Insulation Board Adhesive?

For insulation contractors and ETICS suppliers, a can-based insulation foam adhesive is a fast, clean alternative to mortar. As a PU foam adhesive producer specialising in private label, we produce this product under your brand with a guaranteed constant quality. Pink/grey is standard, other colours on request, so your adhesive is recognisable on site. Full support includes:

  • Can and label design by our own designers, or based on your existing artwork
  • UFI numbers, CLP-compliant labelling and safety data sheets taken care of
  • Flexible outer packaging: neutral boxes with your label or fully pre-printed boxes
  • Also available in lower quantities, ideal for introducing a new article
  • Quick delivery and a team that speaks your language
  • BasePolyurethane
  • CuringMoisture
  • ApplicationGun grade (NBS)
  • ColourPink / grey (other colours on request)
  • Consumption70–100 g/m²
  • Foam yieldApprox. 55 litres
  • Tack-free time4–8 min
  • Cutting time25–45 min
  • Fully load-bearing12 hours
  • Cell structure90% closed cells
  • Foam density17–23 kg/m³
  • Compressive strength (10% deformation)Approx. 125 kPa
  • Tensile strengthApprox. 30 kPa
  • Adhesive strengthApprox. 85 kPa
  • Fire class (DIN 4102)B2
  • Temperature resistance-35 °C to +95 °C
  • Application temperature+5 °C to +35 °C
Polyurethane, 1K moisture-curing

Low expansion construction adhesive

A one-component PU foam adhesive for bonding insulation boards and building materials, with limited gap-filling to compensate for small irregularities. Available under your private label.
  • Strong adhesion to many common building materials
  • Precise and economical to dose
  • Limited gap-filling capacity for small irregularities
  • Does not attack EPS or XPS
  • Helps reduce cold bridges between insulation boards
  • Fast initial adhesion
Base PolyurethaneCuring MoistureApplication Gun grade (NBS)Colour Pink / grey (other colours on request)Consumption 70–100 g/m²Foam yield Approx. 55 litresTack-free time 4–8 minCutting time 25–45 minFully load-bearing 12 hoursCell structure 90% closed cellsFoam density 17–23 kg/m³Compressive strength (10% deformation) Approx. 125 kPaTensile strength Approx. 30 kPaAdhesive strength Approx. 85 kPaFire class (DIN 4102) B2Temperature resistance -35 °C to +95 °CApplication temperature +5 °C to +35 °C
Request your private label

Get a tailored proposal within 2 working days

No obligation · We typically reply within 2 working days

PRODUCT FAQ

Questions about Low expansion construction adhesive

Answers to what distributors ask most about this product. Can’t find yours? Our technical team replies within one working day.

Talk to a product specialist

Substrate advice, test reports or a custom formulation for your market.

Talk to a product specialist

Substrate advice, test reports or a custom formulation for your market.

RELATED PRODUCTS

Complete your private-label range

NBS Gun Cleaner
Solvent-based (acetone / ketones)
  • Screws directly onto NBS foam guns
  • Cleans guns inside and out
  • Spray head for tools and surfaces
Down to -18 °C
Polyurethane, 1K moisture-curing
  • Applicable down to -18 °C
  • Cuttable after 30–45 minutes
  • Gun grade, approx. 40 L yield
Handheld Adhesive
Polyurethane, 1K moisture-curing
  • Handheld with straw, no gun needed
  • 700 kPa shear strength
  • Fixing time 30 minutes
Block & Masonry
Polyurethane, 1K moisture-curing
  • Block adhesive foam instead of mortar
  • 700 kPa shear strength
  • Gun grade, 750 ml